Contact Us


Phone :18053563966

Fax :86-0535-3942507



XF-WXC100Y type of centerless lathe
时间:2011-07-18 15:55      点击次数:

Features of XF-WXC100Y type of centerless lathe: better practical applicability, high cost performance, stable processing speed, high efficiency, good surface quality.

The whole line is controlled by the semi-automatic button. Tool adjustment is uniformly self-centering. Feeding and discharge dev ice designed with self-aligning can automatically adjust as the material change in diameter. The guide device is idler wheel clamping mechanism to avoid the scratch of the material effectively. The middle and rear guide clamping device is designed as the combination structure of the elastic clamping and rigid clamping in order to meet the different requirements of different users for the processed material, accuracy and easy operation. Hydraulic clamping device uses a special hydraulic circuit design, having features of long holding time, saving power, self-locking capabilities, accurate location, reliable compression, and easy adjustment and operation. Tool wiper has long distance, the processing surface is pight and clean, the speed of feed material is high. Feed wheel range is large and highly efficient without the need for changing wheels frequently. Due to installation of the oil-gas lubricating device, the bearing life is extended by 3-6 times, material moving max linear speed up to 8m/min. Universal shaftdrive of auxiliary box ismore reliable.It To avoid the crushed material that withdrawing device adopt Clamping structure .The unit length is15.5 meters, covering an area of 15.5 m X6 m. Equipment is designed and manufactured strictly in accordance with the relevant standards and technology agreements and other documents. Warranty is 12 months.

Main technical characteristics:

1。 Material: titanium, stainless steel (304,306,630), bearing steel, spring steel, alloy tool steel, carbon tool steel, high-speed tool steel, high quality carbon steel, structural alloy steel, non-quenched and tempered steel, easily cutting steel, valve steel, gear steel, die steel, and various non-ferrous metals, pipes and so on。

2. Equipment rack bearing: ≤ 5000Kg

3。 Blank sizes:

Diameter range: Φ16.5-Φ105

Straightness: 2 ‰

Length: 2.2M-6M (it can be lengthened as needed)

4. Finished Product

Diameter range: Φ16-of Φ100

Dimensional accuracy: ≤ h9~ h10

Surface roughness Ra: ≤ 6。3 ~ 3。2

Ovality: half of the tolerance

5。 The technical parameters:

Cutting depth: 0.25-2.5mm

Cutter speed (CVT): 600r/min

Feed rate (CVT) :1-8m / min.

Power of main motor: 45Kw6

Feed and discharge motor power: 4KW 1set

6. Energy and the medium parameters

Voltage: 3X380V ± 10%

Frequency: 50HZ ± 2%

Installed capacity:56KW

Air flow: 0.5m3/min

7。 After-sales service: For equipment problems, respond within 24 hours after receiving the notice, arrive at the site within 72 hours for maintenance, (China, mainland China); for situation being unable to arrive at the site (e。g。 abroad), the technical support will be given timely; the suppler ensure to train operators for buyers so that they can operate and use machine tools。


Previous:This is the first Under a:XF-WXC200B type of centerless lathe
彩娃福彩 幸运飞艇官网 幸运飞艇官网 南粤福彩 红利福彩 吉吉福彩 千亿福彩 东泛福彩 红米福彩 幸运飞艇官网